Skip to main content

PICO

small, red, strong, low-cost

PICO by eldec: Standard generators with one output and simple handling. Available in two housing sizes and numerous power classes. Just Heat!

PICO-S and PICO-L are low-priced generators in uncompromising eldec quality due to high standardisation of the components. PICO generators are offered as medium-frequency and high-frequency generators from 5 to 150 kW for inductive heating of a wide variety of workpieces and materials. They are extremely compact: e.g. the PICO-S generator (desktop housing size) is available with 30 KW MF - the best volume-to-power ratio on the market.
Thanks to the intuitive operator guidance, plug & play is truly reality. Continuous, jog or timer operation, regulation according to output, current, temperature and recipe memory management are standard features.
Occupational safety and high availability are important to us. That is why the generators are designed with electrical isolation of all external signal connections. Cooling water and heat sink temperatures as well as generator and inductor cooling water temperatures are continuously monitored.

Specifications PICO

Intuitive handling through sealed keypad and display

8 different timers with setpoint ramps

Control modes: power, temperature (PID)

Operation modes: Continuous, Tap, Timer

Sensor signals for temperature detection 0-5 V, 0-10 V, 0-20 mA and 4-20 mA

Highspeed eldec regulation and control technology (response time < 10 μs)

Available memory management for up to 50 recipes

Short-circuit and open-circuit proven IGBT transistor technology

Automatic adaptation to resonance frequency

Housing with IP40 protection (PICO-L: IP54)

External control via hardware contacts

Energy transmission via flexible hose package 5 m (MF) and 3 m (HF)

Circuit topology with electrical isolation

Temperature and volume flow monitored fluid circuits with alarm function

Precise energy output due to power setting in 1% steps and 10 ms timer steps

Inverter efficiencies > 95% (depending on operating condition)

Automatic adaptation and power regulation through pulse width modulation (MF) and pulse packet control (HF), even when exceeding the Curie temperature

Interfaces & connections: Pyrometer, foot switch, foot pedal, emergency stop 1-channel, re-cooling system, 24V, signal lamp 4 coloured.

Power limitation possible (adjustable in 1 % steps)

Options PICO

Control possible via foot pedal and external interface

eldec soldering gun & heat controller can be used

2-channel emergency stop for PICO-L

Option package for PICO-L: Craneable housing with chassis

Technical Data PICO-S

Type / Rated CapacityMains Connection
+/-10 %   50/60 Hz
Required cooling
water without
inductor
Dimensions B x H x TWeight
PICO-S 5 MF    3 x 400 V    10 A8    l/min    450 x 280 x 510   mm50 kg
PICO-S 10 MF    3 x 400 V    20 A8    l/min    450 x 280 x 510   mm50 kg
PICO-S 15 MF    3 x 400 V    32 A8    l/min    450 x 280 x 510   mm50 kg
PICO-S 20 MF  3 x 400 V    35 A10    l/min  450 x 280 x 510   mm50 kg
PICO-S 30 MF  3 x 400 V    63 A12    l/min  450 x 280 x 510   mm50 kg
PICO-S 5 HF 3 x 400 V    10 A8    l/min  450 x 280 x 510   mm50 kg
PICO-S 10 HF 3 x 400 V    20 A8    l/min  450 x 280 x 510    mm50 kg
PICO-S 15 HF 3 x 400 V    32 A8    l/min  450 x 280 x 510    mm50 kg

 

Technical Data PICO-L

Type / Rated CapacityMains Connection
+/-10 %   50/60 Hz
Required cooling
water without
inductor
Dimensions B x H x TWeight
PICO-L 50 MF    3 x 400 V    100 A27    l/min    550 x 910 x 800   mm140 kg
PICO-L 75 MF    3 x 400 V    160 A32    l/min    550 x 910 x 800   mm160 kg
PICO-L 100 MF    3 x 400 V    200 A37    l/min    550 x 910 x 800   mm170 kg
PICO-L 150 MF  3 x 400 V    315 A50    l/min  550 x 910 x 800   mm200 kg
PICO-L 25 HF  3 x 400 V    50 A11    l/min  550 x 910 x 800   mm130 kg
PICO-L 35 HF 3 x 400 V    63 A12    l/min  550 x 910 x 800   mm140 kg
PICO-L 50 HF 3 x 400 V    100 A27    l/min  550 x 910 x 800   mm160 kg
PICO-L 75 HF 3 x 400 V    160 A32    l/min  550 x 910 x 800   mm180 kg

 

Come and talk to us

Make an appointment directly for a meeting via phone or MS Teams

Contact us